 |
|
|
Technical information |
- Standard dimensions: 1.30 m x 0.40 m x 2.40 m
or 1.30 m x 0.50 m x 2.40 m (4.26 ft x 1.64 ft x 7.87 ft) W x D x H.
- Framework made of anodised aluminium profiles, non corroding
with patented JUWEL connecting system, made of fibre reinforced polyamide, coreless.
- Service flap doors made of anodised aluminium, non corroding.
- Lighting: fluorescent lamps 36 watts T8 or new T5 (option, with extra charge).
|
 |
|
Filters:
- Bottom main filtration system (1 filter per rack) with adjustable water supply and drain for each separated tank- ensuring an isolation from the whole circulation. Easy access from the front side means the racks can be placed straight against a wall.
- Layer filtration (1 filter for each layer per rack) offers glass separations with holes between the tanks. Each tank layer with adjustable water supply and drain. The access to the filters is from the rear side of the rack.
- Individual filtration (for each single tank) offers complete isolation from all other tanks. Each tank with water supply and drain. The filter access is from the rear side of the rack.
- Individual filtration with access from the front. Each single tank is complete isolated from the other tanks. Due to the frontal access, the fish-units could be placed directly at the wall.
|
Required supplies / drains: |
Fresh water supply: | reduced to 2.5 bar (36 psi), accessible tap with ¾" hose connection |
Drain: | floor level sump with 50 mm tube connection. Trap recommended. |
Power: |
for each 2 racks:
1 plug fused 13 amps. with constant power, 1 plug fused 16 amps. to main switch (for lamps). Installation height: 2.5 m above floor. |
ATTENTION: floor load should be approved! The filled racks can reach up to 1.5 ton per square metre (300 lb/sq. feet). |
back |
